• The Magnfier

    The measuring magnifier is used to manually measure points in the images. These are used, for example, for distance measurements for a local coordinate system…

  • Import images and other data

    Most data like images, point clouds, can be imported into ELCOVISION 10 via Drag & Drop, for some data like projects this has to be…

  • Define a System of Coordinates

    OverviewThere are several ways to define a coordinate system in an image mosaic, click "Transform photo block": Required: Function: The photo block is transformed into…

  • Compute a High Density Pointcloud

    OverviewFor the calculation of the high density point cloud, the computer must have an NVIDIA graphics card with at least 4GB RAM, and an up-to-date…

  • Automatic Orientation with Natural Points

    OverviewFor the calculation of the automatic orientation the computer should have a NVIDIA graphics card with at least 4GB RAM, and a current driver must…

  • Additional Measurement

    The additional measurement serves to measure points for a local coordinate system or control points or simply additional points for other tasks after the orientation…

  • Workflows

    In the following chapters you will find various workflows and suggestions on how to achieve good results in the easiest and best way. The images…

  • ELCOVISON 10 Online Help

    Here you can find the current help for the ELCOVISION 10 Orientation Module and CAD Plugins. By pressing the F1 key in ELCOVISION 10 this…