• The Magnfier

    The measuring magnifier is used to manually measure points in the images. These are used, for example, for distance measurements for a local coordinate system…

  • Manual Image Measurement Methods

    RectificationMeasurement principleA flat rectification plane is defined in an image. This plane describes the transformation of the image coordinates into a local coordinate system of…

  • Digital Rectification

    OverviewWith digital rectification, images from any camera can be evaluated very quickly and easily in two dimensions or even to a limited extent in three…

  • Import images and other data

    Most data like images, point clouds, can be imported into ELCOVISION 10 via Drag & Drop, for some data like projects this has to be…

  • ELCOVISION 10 Plugin

    OverviewAll measurement results of ELCOVISION 10 will be transferred directly to the AutoCAD /BricsCAD command line as if you would enter them manually. This means…

  • Define a System of Coordinates

    OverviewThere are several ways to define a coordinate system in an image mosaic, click "Transform photo block": Required: Function: The photo block is transformed into…

  • Additional Measurement

    The additional measurement serves to measure points for a local coordinate system or control points or simply additional points for other tasks after the orientation…

  • Workflows

    In the following chapters you will find various workflows and suggestions on how to achieve good results in the easiest and best way. The images…